Square Tube Inserts / Blanking End Caps / Furniture Feet Made in Germany / White

Description

UK’s Leading Supplier of Plastic, Rubber, Metal & Felt Components
Made in Germany & stocked in the UK
Durable multipurpose Square Ribbed Plastic Tube Inserts by Keay Vital Parts
Engineered and Made in Germany using a hard-wearing Polyethylene plastic. Provides a smooth sliding surface to hollow tubes. Great for finishing off metal projects or as replacement feet on metal furniture frames.
Available in Many Sizes
Stocked in a wide variety of sizes suitable for tubes with a wall thickness of 1.5mm - 2mm with OUTER DIMENSIONS of 15x15mm, 16x16mm, 18x18mm, 20x20mm, 22x22mm, 25x25mm, 28x28mm, 30x30mm, 35x35mm, 40x40mm, 45x45mm, 50x50mm & 60x60mm.
Ordering & Fitting Guide
Step 1
Use a measuring caliper, tape measure or ruler to measure the outside dimensions of your tube as accurately as possible.
Step 2
Measure the wall thickness of the tube.
Our inserts are suitable for 1.5 to 2mm Wall Thickness.
Step 3
Choose the required Pack Size which determines the number of units sold.
Choose an insert size that corresponds to the outside measurement of your tube that you have already measured.
For Example, if your tube has an outside measurement of 20mm x 20mm and a wall thickness of 1.5mm-2mm, then the 20mm x 20mm insert should fit.
Step 4
Push in or gently hammer in with a rubber mallet to fit. Ensure the insert has gone all the way in.
Multipurpose:
Often used as gliders on Metal furniture, School Chair Feet, Stack-able chairs, Garden Furniture, Outdoor Rattan Furniture, Contract Furniture, Restaurant Chairs, Cafe Chairs etc.
Finishing for box section projects
Protection for the internal section of metal tubes
Safeguard against sharp edges
Blanking square hollow structures
Provides a clean, safe & professional finish for metal objects
UK’s Leading Supplier of Plastic, Rubber, Metal & Felt Components
Made in Germany & stocked in the UK
Engineered and Made in Germany using a hard-wearing Polyethylene plastic. Provides a smooth sliding surface to hollow tubes. Great for finishing off metal projects or as replacement feet on metal furniture frames. Stocked in a wide variety of sizes suitable for tubes with a wall thickness of 1.5mm - 2mm with OUTER DIMENSIONS of 15x15mm, 16x16mm, 18x18mm, 20x20mm, 22x22mm, 25x25mm, 28x28mm, 30x30mm, 35x35mm, 40x40mm, 45x45mm, 50x50mm & 60x60mm. Use a measuring caliper, tape measure or ruler to measure the outside dimensions of your tube as accurately as possible. For Example, if your tube has an outside measurement of 20mm x 20mm and a wall thickness of 1.5mm-2mm, then the 20mm x 20mm insert should fit. Often used as gliders on Metal furniture, School Chair Feet, Stack-able chairs, Garden F