Shimano SLX M7110 Super Boost Rear Hub - Centerlock

Description

bestdelas
Product description
Shimano SLX M7110 Super Boost Rear Hub - Centerlock
With the introduction of the 12-speed drive into the SLX Group, a new type of freewheel had to be introduced to assemble cassettes with very small sprockets.
For example, the Micro Spline freehub was developed in cooperation with DT Swiss. This allows Shimano to use cassettes with enormous bandwidths and the use of a small 10 tooth pinion. At the same time, the freewheeling principle was changed from pawls to a pulley freewheel. Due to the very fine toothing shrinks the distance of the locking points to a low 7 °. The free travel when pedaling is immensely reduced and allows you always the best possible start, whether in the race or on the trail.
What's left is the durable and robust bearing the hub - tried and tested cone bearing with hardened and polished steel bearing shells and stainless steel balls. In conjunction with labyrinth and contact seals, a long service life is guaranteed and the well-known silky smooth running of the hub is achieved.
Features
intended use : Cross Country, Marathon, All Mountain, Enduro
Material: Housing: aluminum, axle : steel
axle type : 12x157 mm Super Boost +
Number of holes: 28 or 32 holes
Brake Disc Mount: Center Lock
Freewheel Compatibility: 12-speed Shimano Micro Spline
Freewheel type: toothed washers
bearing : cone bearing with stainless steel balls
Seal: labyrinth rubber seals
Spoke type: standard spokes (J-bend)
Spoke tension: not specified
maximum system weight: not specified
Color: blue gray