Hooker 60mm width Aero front hub

Description

Hooker 60mm width Aero front hub.
Extremely rare, if you need this then here's your chance.
Hi All, I'd like to sell my Hooker front hub.  This is the super narrow and aero 18 hole hub designed to work with the corresponding Hooker 650c aero fork.
here are some dimensions
width between flanges=45mm
over-locknut-distnce=63.75mm, but the locknuts fit into recessed depressions in the forktips that are 1-2mm deep.
flange diameter=54mm
The hub attaches to the fork by way of a countersunk bolt which passes through a hole in the right forktip, through the hollow hub axle, and threads into the left forktip. when complete with wheel, the entire assembly is very clean and minimal and presents an extremely narrow and aero cross section to the wind.
as for condition: I don't see any evidence of ever having been laced to a rim.  There is no deformation at the spoke holes (5th photo is representative).  There are few minor scuffs at the rim of one of the flanges which I've tried to depict in the 6th photo and you can also make out in the 1st photo, but over all the finish is excellent.  The bearings feel very smooth.
Please see my other auctions for more Hooker stuff, including a complete Hooker Elite Cat1 with 1st generation Mavic ZAP, Hooker "Aero-or-Die" integrated bar and stem, Hooker 700c aero road fork and  Hooker 130mm Cat1 road stem.
All sales final, no returns or refunds.  This stem is over 25 years old and so while it appears to be in good working condition, is intended for display only.  The auction winner assumes all risk of death or injury which results from the use of this hub.
Flat shipping to Continental US only via USPS priority