DT SWISS 350 MTB Boost Hub 28/32 Hole 6-Bolt HG XD&Micro Spline Hubs

Description

Front HUB: 15X110MM
Flange Distance (L/R): 67.4mm (27.4 mm/40 mm)
Pitch Circle Diameter (L/R): 58.0 mm/52.0 mm
Rear HUB:12X148MM
Flange Distance (L/R): 59.9 mm (36.6 mm/23.3 mm)
Pitch Circle Diameter (L/R): 58.0 mm/52.0 mm
Spoke Hole Diameter: 2.6 mm
DT SWISS Ratchet Planetary Gear System Technical Description:
1. Snap Fit Side Cover: The hand detachable side cover provides the convenience of quick maintenance and specification conversion. + /-0.0XX mm snap fit tolerance.
2. Bearing: high-end cassette bearing, single contact surface sealing ring achieves extremely low running resistance. Single bearing load capacity of 2080 N.
3. Gear Ring - Carries the inner Palin and transmits the torque to the hub housing. 450 NM test torque approved.
4. Lightweight alloy chuck: optimizes dynamic hub loading. After 13 wheel life cycle tests.
5. Spring: Tested for the product life cycle of 13 times the wheel set.
6. Planetary gear: the best system to transmit torque with the lightest weight.
18 T / 20 ° bite angle | 36 T / 10 ° bite angle | 54 T / 6.6 ° bite angle | Available options
7, alloy tower base: light surface treatment and anode. In order to reduce the running resistance, the oil seal contact surface adopts high precision and extremely smooth surface treatment. +/- 0.0XX MM Oil Seal Seat Accuracy.
Bite angle refers to the angle at idle that the hub sends the gentleman's pedaling power to the front of the wheel. We must understand that the reduction of the bite angle is limited, because the reliability of the De La Torre foundation system also depends on the angle. What makes the planetary gear system so unique? The answer is because all the teeth of the two gears can be connected at the same time each time. The System Center pawl is a control, with only a few pawns hooking at a time; In addition, the contact area of the pawl is quite small, and the tooth surface of the planetary gear system has raised a large amount of occlusal area. This result has resulted in the legendary reliability of the planetary gear system and its distinctive gear biting sound.
DT SWISS 350 BOOST MTB hubs
We are a DT SWISS dealer in mainland China and we have DT SWISS accessories.
Please check with Customer Service before ordering to specify the hub specifications: including,
1. Model: 350 boost
2. Type: mountain
3. Axle width: 110 front,  148mm Rear
4. Shaft diameter: FRONTt 15MM, REAR 12mm
5. Number of spoke holes: 28 / 32H
6. Pull the ear: side pull
7 Taki type:
HG: suitable for Shimano 8-11s SRAM 8-12s
XD: suitable for SRAM GX / xo1 / xx1 11-12s
MS: suitable for Shimano 12s
8. Brake mounting surface: six nails lock the disc brake