-40%
Braided Kevlar Cord 400Lbs~2000Lbs Fishing Camping Hiking Ropes Made with Kevlar
$ 26.39
- Description
- Size Guide
Description
400lb-2000lb BRAIDED KEVLAR LINEKevlar Fiber
: the braided kevlar string is made of 100% kelvar fiber which is of high strength, high harness, high toughness and high abrasion resistance.
Construction of Braid: Multi-strands interweaving process makes the string / cord much more durable, and it won't unravel like twisted line.
Tough String
: every kevlar fiber is of high tensile strength.
It exerts much higher strength in the same diameter.
Cut-Resistance
: One of the best advantages of Kevlar string.
It helps avoid many unexpected string snaps which happen a lot in binding and fastening objects with sharp edges.
GENERAL APPLICATIONS
Kite String, Kite Fixing / Dragging Line for Giant Kites, Show Kites, Kitesurfing
Camping
: Tarp ridge lines / tent guylines / bear bagging / Ultralight backpacking, wrapping up tools used near heat source
Survival gear, emergency / repair cord
Climbing / Rigging / Arborist accessories
Fishing accessory line / Speargun Shooting Line
Stretch annoys much in applications like stringing hammocks, kite flying control, especially in control of stunt kite or traction kite.
Kevlar cords have extremely low stretch and don't create creep even after long time loading.
One of the best advantages of Kevlar line.
It helps avoid many unexpected string snaps which happen a lot in binding, fastening objects or uses near sharp edges.
In addition to "resistance" properties, Kevlar line is also highly resistant to abrasion, to chemicals (especially acids, and alkalis.)
SPECIFICATION
Material: 100% Kevlar Fiber
Construction: braided
Fusion point: 800~900 °F / 427~482 °C
Kevlar doesn't melt like nylon or polyester.
It decomposes at high temperature.
Length:
50ft~100ft / 15m~30m
300ft~1000ft / 90m~300m
Strength - Diameter
400lb -1.5mm
800lb - 2.5mm
1200lb - 3mm
1800lb - 3.5mm
2000lb - 4mm
Approximately ±2~3% deviation exists in measurement.Packaging: On Spool
Note!
Data of all cords' marked strength comes from laboratory test.There are a wide variety of inflential factors in practical use.
For all kind of cords, the safe working strength is around 20% of its original strength.